ZZC
Detection principle | electrochemistry |
sensor | intelligent sensor |
sample mode | Diffusion type |
working power supply | 9~30VDc |
maximum power | 30mA@24VDC |
output signal | 4~20mA, fine-tunable |
load impedance | 600Q |
Other output | RS485 Modbus / HART7.2 module (optional), relay module (optional) high report and low report fault 30VDC / 5A, often open / often close optional |
Detection accuracy | S 2%F.S (calibration point) |
Response Time (T9o) | Depending on the detected gas |
Electrical interface | 3/4”NPTM |
way to install | 2 " riser / wall mounted installation |
display mode |
12896 Dot matrix LCD, support graphic display 1 LED status indicator, 4 LED function indicator lights |
levels of protection | IP66 |
ambient temperature |
-40℃ ~ + 70 °℃ (Limit Value) -20 °℃ ~55C (typical value) |
ambient humidity | 10~95%RH (no condensation exposure) |
ambient pressure | 86kPa~106kPa |
outline dimension | 182mm×195mm×107mm(HWD) |