DWCT
Part No:
CA3106E36-10P-B-F80-A176
Harnessing Info: Contact Cross-Section:
See assembly instruction
Insulator And Grommet Material:
CR-Elastomere
Safety Provisions:
IP67 acc. to DIN 40 050 and IP68 (1 bar pressure for 16h)
Ambient Temperature:
Standard insulator material -55°/+125°C (-67/257°F)
Coupling Torque:
Closing: 23 Nm max / Opening: 1,03 Nm min
Endbell Style:
Endbell with clamp and bushing
Salt Spray Resistance:
500 hours salt spray resistant
Number of Contacts:
48 contacts size 16
Sep# Force Per Contact (Size 10/20):
0,3 N
Wire Cross Section:
AWG 18/16
Harnessing Info: Insulator Diameter:
See assembly instruction
Contact Resistance (Size 10/20):
12 mΩ
Wire Stripping (Size 10/20):
4 mm
Contact Plating:
Gold 0,5 μ
Shell Style:
Plug, straight
Contact Rating At +20 °c (68 °f) (Size 10/20):
8 A
General Info:
All tests in accordance with VG95319 and/or if applicable with VG95210
Bayonet:
Connector with bayonet coupling
Operating Voltage:
In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC 60364-4-41.
Insulator Resistance:
Acc. To VG95319, part 2, test no. 5.12 and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ
Air And Creepage Paths (Min):
1,1 mm
Contact Arrangement:
36-10
Gauge:
For infos on Gauge please see catalog VG95234, part 1
Contact Material:
Copper Alloy
Contact Retention (Size 10/20):
30 N
Shell Plating:
Olive drab chromate over cadmium plating (conductive)
Shell Material:
Aluminium alloy
