DWCT
Specifications detailed
contents of a project
Ordering product No. CX-491-P-C05
Model # CX-491-P-C05
The CE indicates the applicable instruction, the EMC instruction, the RoHS instruction
Detection distance is 3m
(Note): The detection distance and the detected object of the regression reflective sensor are values relative to the mirror RF-230.In addition, the detection distance represents the detectable range of the detected object.
Check opaque, translucent and microhedron above 50mm
(Note): The detection distance and the detected object of the regression reflective sensor are values relative to the mirror RF-230.In addition, the detection distance represents the detectable range of the detected object.
(Note): Before use, please confirm through the actual test.
Poor difference (lag) -
Replicate accuracy (perpendicular to the detection axis) below 0.5mm
Power supply voltage 12~24V DC ± 10% pulse P-P below 10%
Consumption current is below 13mA
Output a PNP open-circuit collector transistor
Outflow current: 100mA
External voltage: below 30V DC (between output- + V)
Remaining voltage: below 2V (when outflow current is 100mA) and below 1V (when outflow current is 16mA)
Output: output action can be selected by switch light ON / non light ON
Output: short-circuit protection equipment
The reaction time was below 1ms
The operating status indicator orange LED (lit on output ON) is located on the light acceptor
Stability indicator lamp green LED (light on stable light, stable non-light on light) transmission type is located on the light receptor
power light-
Sensitivity regulator The constant variable regulator is mounted on the light receptor of the penetrating sensor
Anti-interference function (2 sensors)
Environmental resistance: protective structure IP67 (IEC), anti-immersion type
Environmental resistance: use ambient temperature-25~ + 55℃ (note non-condensation, icing), when storage: -30~ + 70℃
Environmental resistance: use the ambient humidity of 35~85%RH, storage time: 35~85%RH
Environmental resistance: Use ambient illumination incandescent lamp: below 3,000lx
Environmental resistance: voltage resistance AC1,000V 1 minute between all power connection terminals and housing
Environmental resistance: insulation resistance between all power supply connection terminals and housing, above 20M, DC250V-based high resistance meter
Environmental resistance: vibration resistance frequency 10~500Hz double amplitude 1.5mm(MAX.10G) XYZ for 2 hours
Environmental resistance: impact resistance frequency 500 m/s2 (about 50G) XYZ 3 times in each direction
Light element (modulated) red LED
Light jection element (modulation): peak wavelength 680nm
Material shell: PBT (polyethylene terephthalate)
Lens: propylene
Display cover: propylene
Cable 0.2 m m, 23-core rubber cable, 0.5m long
The total length of the cable extending over 0.3mm2 can be extended to 100m
Attachment RF-230 (mirror): 1
