DWCT
Specifications detailed
contents of a project
Order Product No. FX-CH2
Model number, FX-CH2
Applicable sensor FX-301 (P) (note), FX-305 (P)
(Note): Only the upgraded FX-301 (P) is available.Do not use for the FX-301 (P) before the upgrade.The upgraded FX-301 (P) has only "NAVI" on the single side.
Power supply voltage 12~24V DC ± 10% pulse P-P below 10%
Power consumption below 600mW (with all indicator lights on)
Enter the Low: 0~ + 2V DC
Outflow current is 0.5mA
Input impedance is about 10 kΩ
High: + 5V~ + V DC or open circuit
Power indicator green LED (lights on)
Communication work indicator green LED (light on loading or 2 / limit, save or automatic)
Environmental resistance: use ambient temperature-10~ + 55℃ (number of sensor connections 4~7: -10~ + 50℃, number of sensor connections 8~16: -10~ + 45℃) (but should be no condensation and icing), save: -20~ + 70℃
Environmental resistance: use the ambient humidity of 35~85%RH, when saving: 35~85%RH
Environmental resistance: voltage resistance AC 1,000V 1 minute between the overall housing of the charging unit
Environmental resistance: insulation resistance between 20M under DC250V
Environmental resistance: vibration resistance of 10~150Hz double amplitude 0.75mm X, Y, Z for 2 hours
Environmental resistance: impact resistance 98 m/s2 (about 10G) X, Y, Z 5 times
Material body shell: heat-resistant ABS
Connection mode The connector connection type
(Note): No single-touch cable is attached.Be sure to purchase another single-touch cable as available.
CN-73-C1(1m)、CN-73-C2(2m)、CN-73-C5(5m)
The cable length of cables above 0.3mm2 can be extended to 10m
Weight Body weight: about 20g
Packaging weight: about 40g
Annex CN-EP1 (connector to connect the input device) (Note): 1
(Note): Applicable wire: 0.08mm2(AWG28)~0.5mm2 (AWG20), wire cladding outer diameter below 1.5mm.
