ZZC
Sensepoint xCD transmitter | |||
make use of |
"3-wire, 4-20mA, universal transmitter suitable for catalytic combustion, electrochemical and NDIR multiple sensing infants, Used to suffocate inside and outside combustible, toxic and other dangerous ling environment gas physical examination rinse." |
||
Electrical parameters | Input voltage: STD, RFD: 16-32Vdc (rated: 24Vdc).RTD: 18-32Vdc (rated: 24Vdc) | ||
power dissipation: | Electrochemistry: 3.W, infrared: 3.rWw, catalytic combustion 4.9w | ||
Current output: | 4-20mA [Source or Assembly) | ||
Ii 0.0e1.0 mA | hitch | ||
4.0mA- 20.0 mA | Standard gas detection | ||
2.0 mA or 4.0 mA (17.4 mA) | Suppress the output when setting the parameters or the calibration | ||
22.0mA | outrange | ||
Wiring sister-in-law |
sTD: 15 wiring carbon: RTD & RFD: 18 terminals, Through diameter 0.5mm(20AWGj-2.5mm (134WG) |
||
electric relay |
Three 5A25oAC capacity of female electric arrogance, can be set to often open or often closed And the rat excitation or non-jiao excitation |
||
communication | RS485 Modous | ||
结构 | |||
Transmitter material | Aluminum alloy, 316 stainless steel | ||
Sensor material | 316 Stainless steel | ||
weight | Aluminum alloy: 2.4kg, 316 stainless steel mace: 4.5kg | ||
way to install | Wall wall or pipe installation | ||
connect | Two M20 (or 2x34 " NPT field inlet, one M25 sensor connector | ||
Sex female | |||
repetitiveness | +/-1% Full range | ||
degree of linearity | / -1% Full range | ||
accuracy | + 5% Full range (o2, CO, H2S, catalytic combustion) | ||
Response when the same | T50 15s, T90c30s (catalytic combustion and infrared sensor} | ||
Measured gas |
Gas name | 气体量程 | The incremental default range receives the calibrated gas concentration | ||||||
oxygen | 25.0%ol only | Fixed in na 25.0%Vol 20.9%NoH | | ||||||
Value of hydrogen | 10.0 to 100.0ppm | 1ppm 50ppm | 30 to 70%range | |||||
carbon monoxide | 100 to 1000ppm | 100ppm | 500ppm |
30 to 70%range (Tisy 50%) |
||||
hydrogen | 1,0C0ppm only | n'a | 1,000ppm | |||||
Argon dioxide | 10 to 50ppm | 5ppm | 1Oppm | |||||
Jia Wan (catalytic combustion | 20,0 to 100.0%LEL | 10%LEL | 100.0%LEL | |||||
A match against infrared) | 20,0 to 100.0%LEL | 10%LEL | 100.0%LEL | |||||
C niang | infrared) | 20,0 to 100.0%LEL | 10%LEL | 100.0%LEL | |||||
Carbon dioxide (infrared) | 2.00%Vol only | na | 2.00%Vol | 0.8 to 1.2%Vol | ||||
Note: The above product features are temperature 20'C ~ 25 °℃ and humidity is Results of 50%RH.For the calibration, please use the calibration Check the cap and the recommended flow rate, if using the weather protection cover and in The xcD RTD uses a Sensepoint legacy gas-sensing saw |
The dysentery response rate will slow down in the low wet environment.All these are only for their typical values.Detailed data is required | |||||||
Gas name | Gas range | resolution ratio | Default range | Caliof gas concentration is recommended | ||||
15ppm only 50ppm only |
0.1 | 15.0ppm | 10ppm | |||||
0.1 | 50.0ppm | 20ppm | ||||||
helium |
50ppm only 100ppm only 1000ppm only |
0.1 | 50.0ppm | 25ppm | ||||
o.1 | 100ppm | 50ppm | ||||||
1 | 1000ppm | 500ppm | ||||||
chlorine |
5ppm only 15ppm only |
0.01 | 5.00ppm | 3ppm | ||||
0.1 | 15.0ppm | 10ppm | ||||||
nitrogen dioxide | 10ppm only | 0.1 | 10.0ppm | 5ppm | ||||
nitric oxide | 100ppm only | 0.1 100.Oppm | 50ppm |