PM-F25-P Japan Panasonic amplifier built-in U-type micro photoelectric sensor [super small cable type]

Rate:

0.0000/5

( 0 reviews )

Item NO.: V004893 MOQ: 0

Weight: 0kgs

Package Size:

Price：

$0.00

Qty：

$0.00

Shipping：

Calculate Shipping Cost

DWCT

Specifications detailed
contents of a project
Order product No. PM-F25-P
Model number PM-F25-P
Compliance with CE mark instruction EMC instruction, RoHS instruction
Detection distance: 6mm (fixed)
Detection object 0.8mm×1.2mm opacity bodies
The difference shall be below 0.05mm
The repeat accuracy is below 0.01mm
Power supply voltage 5V DC~24V DC ± 10% pulsation P-P below 10%
Consumption current is below 15mA
Output a PNP open-circuit collector transistor
Outflow current: 50mA
External voltage: below 30V DC (between output and + V)
Resiaining voltage: 2V (outflow current 50mA), 1V (outflow current 16mA)
Output: output action ON / shading ON equipment 2 output
Output: short-circuit protection equipment
Reaction time into the light: under 20s
When shading: less than 80s
(Reaction frequency is 3kHz) (Note)
(Note): The reaction frequency is the value that rotates the disk in the figure below.

Operating status indicator orange LED (lights on when light)
Damage 3
Environmental performance: protection build IP64 (IEC)
Environmental performance: Use ambient temperature-25℃ ~ + 55℃ (note non-dew, ice), when storage: -30℃ ~ + 80℃
(Note): If used at an ambient temperature above + 50℃, be sure to install the sensor on the metal body.
Environmental performance: use ambient humidity: 5%RH~85%RH, when storage: 5%RH~95%RH
Environmental performance: Use ambient lighting degree fluorescent light: light surface illumination degree below 1,000 x
Environmental performance: voltage resistance AC1,000V 1 minute between all power connection terminals and housing
Environmental performance: insulation resistance all power connections between terminal and shell, over 20M, based on DC250V high resistance meter
Environmental performance: vibration resistant frequency 10Hz~2,000Hz double amplitude 1.5mm (* large acceleration 196 m/s2) XYZ for 2 hours
Environmental performance: impact resistance acceleration of 15,000 m/s2 (about 1,500G) XYZ 3 times in each direction
LED (peak wavelength: 855nm, non-modulated)
Material shell: PBT
Display cover:, polycarbonate
Cable 0.09mm2 4 core with rubber insulated cable PVC 1m
Cable extension 0.3mm2 cable, total length can be extended to 100m
(Note): If the extension cable exceeds 20m, please confirm that the supply voltage at one end of the sensor accessory cable is above 4.5V.
Weight Body weight: about 10g
Packaging weight: about 15g
Note The measurement condition when not specified is using the ambient temperature = + 23℃.