MHH
2905280
delivery time:8-12 weeks
Product Description
Two-channel input-loop-powered 2-way isolator with plug-in connection technology for the electrical isolation and filtering of analog signals.
The input-loop-powered isolator allows operation with active sensor technology with a supply voltage of 6 V DC to 30 V DC.
The device is powered via the current loop of the sensor. Input signal = output signal: 0(4) mA to 20 mA. With screw connection
roduct properties | |
roduct type | Signal conditioner |
No.of channels | 2 |
Type | Signal conditioners with SlL functional safety |
lnsulation characteristics | |
overvoltage category | l |
Pollution degree | 2 |
Electrical properties | |
No.of channels | 2 |
Eloctrical isolation | 2-way isolation |
Signal transmission behavior | lnm Out |
Maximum temperature coefficient | s0.002 %/K(of measured value : 100 Q load) |
Transmission error,typical | 0.08 %(of final value) |
Electrical isolation lnputoutputpower supply | |
Rated insulation voltage | 300 Vms |
Test voltage | 2.5 kVAC(50 Hz,60 s) |
lnsulation | Safe isolation in accordance with IEC/EN 61010-1 |
Supply | |
Supply voltage range | no separate supply voltage necessary |
nput data Signal |
|
Number of inputs | 2 |
Configurable/programmable | no |
Max. voltage input signal | <30.5v |
Current input signal | o mA...20 mA |
4 mA...20 mA | |
lnput voltage limitation | 30.5v |
Voltage dissipation | 2.9v(l= 20 mA) |
Step rosponso (10-90%) | 5 ms(500 load) |
Additional error,load-dependent | 0.022 %(of measured value : 100 load) |
Response current | approx.50 uA |
Output data Signal: Current |
|
Number of outputs | 2 |
Configurable/programmable | no |
Max. voltage output signal | 27.5v |