ZZC
Honeywell XCD fixed on-line carbon monoxide hydrogen sulfide oxygen can gas gas ammonia gas detector
Sensepoint xCD transmitter | ||
make use of |
3-Line, 4-20mA, universal transmitter suitable for catalytic combustion, electrochemical, and NDIR multiple sensing infants, Used to suffocate inside and outside combustible, toxic and other dangerous ling environment gas physical examination rinse. |
|
Electrical parameters | Input voltage: STD, RFD: 16-32Vdc (rated: 24Vdc).RTD: 18-32Vdc (rated: 24Vdc) | |
power dissipation: | Electrochemistry: 3.W, infrared: 3.rWw, catalytic combustion 4.9w | |
Current output: | 4-20mA [Source or Assembly) | |
Ii 0.0e1.0 mA | hitch | |
4.0mA- 20.0 mA | Standard gas detection | |
2.0 mA or 4.0 mA (17.4 mA) | Suppress the output when setting the parameters or the calibration | |
22.0mA | outrange | |
Wiring sister-in-law |
sTD: 15 wiring carbon: RTD & RFD: 18 terminals, Through diameter 0.5mm(20AWGj-2.5mm (134WG) |
|
electric relay |
Three 5A25oAC capacity of female electric arrogance, can be set to often open or often closed And the rat excitation or non-jiao excitation |
|
communication | RS485 Modous | |
structure | ||
Transmitter material | Aluminum alloy, 316 stainless steel | |
Sensor material | 316 Stainless steel | |
weight | Aluminum alloy: 2.4kg, 316 stainless steel mace: 4.5kg | |
way to install | Wall wall or pipe installation | |
connect | Two M20 (or 2x34 " NPT field access interfaces, 1 M25 sensor connector | |
function | ||
repetitiveness | ‘+/-1%full range | |
degree of linearity | /-1%full range | |
accuracy | ’+ 5% Full range (o2, CO, H2S, catalytic combustion) | |
Response when the same | T50 15s, T90c30s (catalytic combustion and infrared sensor} | |
Measured gas |
Gas name | Gas range | The incremental default range receives the calibrated gas concentration | ||||||
oxygen | 25.0%ol only | na 25.0%Vol 20.9%NoHfixed| | ||||||
hepatic gas | 10.0 to 100.0ppm | 1ppm 50ppm | 30 to 70%range | |||||
carbon monoxide | 100 to 1000ppm | 100ppm | 500ppm |
30 to 70%range (Tisy value 50%) |
||||
Hydrogen oxide | 1,0C0ppm only | n'a | 1,000ppm | |||||
Argon dioxide | 10 to 50ppm | 5ppm | 1Oppm | |||||
Methane (catalytic combustion | 20,0 to 100.0%LEL | 10%LEL | 100.0%LEL | |||||
Methane (infrared) | 20,0 to 100.0%LEL | 10%LEL | 100.0%LEL | |||||
Propane (infrared) | 20,0 to 100.0%LEL | 10%LEL | 100.0%LEL | |||||
Carbon dioxide (infrared) | 2.00%Vol only | na | 2.00%Vol | 0.8 to 1.2%Vol | ||||
Note: The above product lake characteristics are the result of toilet inspection in an environment with a temperature of 20'C ~ 25 °℃ and a humidity of 50%RH.For calibration, check with the calibration cap and recommended flow, if using a weather shield and a Sensepoint legacy sensing saw at xcD RTD | The dysentery response rate will slow down in the low wet environment.All these are only for their typical values.For detailed data, please contact Honeywell Analyics Company directly. | |||||||
Gas name | Gas range | resolution ratio | Default range | Caliof gas concentration is recommended | ||||
15ppm only 50ppm only |
0.1 | 15.0ppm | 10ppm | |||||
0.1 | 50.0ppm | 20ppm | ||||||
helium |
50ppm only 100ppm only 1000ppm only |
0.1 | 50.0ppm | 25ppm | ||||
o.1 | 100ppm | 50ppm | ||||||
1 | 1000ppm | 500ppm | ||||||
chlorine |
5ppm only 15ppm only |
0.01 | 5.00ppm | 3ppm | ||||
0.1 | 15.0ppm | 10ppm | ||||||
nitrogen dioxide | 10ppm only | 0.1 | 10.0ppm | 5ppm | ||||
nitric oxide | 100ppm only | 0.1 100.Oppm | 50ppm |