ZLL
XPSDMB1132
delivery time:1 week
range of product
Preventa Safety automation
product or component type
Preventa safety module
safety module name
XPSDMB
safety module application
Monitoring 2 coded magnetic switches
function of module
Coded magnetic switch monitoring
safety level
Can reach PL e/category 4 conforming to EN/ISO 13849-1
Can reach SILCL 3 conforming to EN/IEC 62061
safety reliability data
MTTFd = 83.1 years conforming to EN/ISO 13849-1
DC > 99 % conforming to EN/ISO 13849-1
PFHd = 3.92E-9 1/h conforming to EN/IEC 62061
[Us] rated supply voltage
24 V DC - 20...20 %
output type
Relay, 2 NO circuit(s), volt-free
number of additional circuits
2 solid state outputs
synchronisation time between inputs
< 0.5 s
power consumption in W
2.5 W
input protection type
Internal, electronic
[Uc] control circuit voltage
28 V DC
maximum line resistance
100 Ohm
breaking capacity
180 VA holding AC-15 C300 relay output
1800 VA inrush AC-15 C300 relay output
breaking capacity
1.5 A at 24 V (DC-13) time constant: 50 ms for relay output
output thermal current
6 A per relay for relay output
[Ith] conventional free air thermal current
12 A
associated fuse rating
4 A gG for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200
6 A fast blow for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200
minimum output current
10 mA for relay output
minimum output voltage
17 V for relay output
maximum response time on input open
20 ms
[Ui] rated insulation voltage
300 V (pollution degree 2) conforming to IEC 60947-5-1
300 V (pollution degree 2) conforming to DIN VDE 0110 part 1
[Uimp] rated impulse withstand voltage
4 kV overvoltage category III conforming to IEC 60947-5-1
4 kV overvoltage category III conforming to DIN VDE 0110 part 1
local signalling
3 LEDs
connections - terminals
Captive screw clamp terminals, 1 x 0.14...1 x 2.5 mm² flexible without cable end
Captive screw clamp terminals, 1 x 0.14...1 x 2.5 mm² solid without cable end
Captive screw clamp terminals, 1 x 0.25...1 x 1.5 mm² flexible with cable end, with bezel
Captive screw clamp terminals, 1 x 0.25...1 x 2.5 mm² flexible with cable end, without bezel
Captive screw clamp terminals, 2 x 0.14...2 x 0.75 mm² flexible without cable end
Captive screw clamp terminals, 2 x 0.14...2 x 0.75 mm² solid without cable end
Captive screw clamp terminals, 2 x 0.25...2 x 1 mm² flexible with cable end, without bezel
Captive screw clamp terminals, 2 x 0.5...2 x 1.5 mm² flexible with cable end, with double bezel
current consumption
8 mA at 28 V DC on power supply
mounting support
35 mm symmetrical DIN rail
net weight
0.25 kg
