HC
Inverter 2.2kW FC-051 Single-phase 220V
delivery time:
Coated PCB Standard
Resistant to harsh environments
Side-by-side installation for real space saving
The compact book-size design allows true side-by-side installation without derating.
* Small dust penetration
Forced ventilation in the VLT® Micro Drive avoids electronics. The printed circuit board is well protected inside the frequency converter.
Built-in RFI filter
A built-in RFI filter limits radio interference from motor cables, allowing the use of motor cables (shielded) up to 15 meters. Compliant with EU standards
Built-in braking function
With built-in DC and AC braking, the VLT® Micro Drive converts the kinetic energy generated in the application into braking power to slow down the motor. The brake chopper is built into the frequency converter above 1.5 kW.
Display options
Digital local control panel
with potentiometer (LCP11)
with potentiometer (LCP12) LCP
Panel mount kit with three-meter cable
Accessories
IP21 / NEMA 1 kit.
Decoupling plate kit.
DIN rail mounting kit.
other attachments
IP21/NEMA 1 Kit
Coupling Plate Kit,
DIN Rail Mounting Kit
Specification
Mains (L1, L2, L3):
Supply voltage
1 x 200–240 V ±10%, 3 x 200–240 V ±10%
3 x 380–480 V ±10%
Output data (U, V, W):
The output voltage.
0 - 100% of supply voltage
Output frequency
0 200 Hz (VVC+ mode),
0 400 Hz (U/f mode)
output switching
unlimited
Acceleration and deceleration time
0.05 3600 seconds
Pulse input:
programmable input
5
logic
PNP or NPN
voltage level
0 24 V
Pulse input:
programmable input
1*
voltage level
DC 0 - 24 V (PNP positive logic)
Pulse input frequency
20 5000 Hz
* One of the digital inputs can be used for pulse input.
analog input
analog input
2
model
1 current/1 voltage or current
voltage level
0 10 V (adjustable)
current level
0/4 20 mA (adjustable)
Analog output:
Programmable analog output
1
Current range of the analog output
0/4 20 mA
Relay output:
Programmable relay output
1 (240VAC, 2A)
Certification:
CE, C-tick, U
Fieldbus Communication:
FC protocol
Modbus RTU