ZLL
1756-IF6I
delivery time:in stock
| Type of electric connection | Screw-/spring clamp connection |
| Channel bandwidth | 15 Hz |
| Module keying | Electronic, software configurable |
| Module conversion method | Sigma-Delta |
| Offset drift | 2 µV/°C |
| Input range | ±10.5V, 0...10.5V, 0...5.25V, 0...21 mA |
| Data format | Integer mode (left justified, 2 s complement) IEEE 32-bit floating point |
| Wire category | Category: 2 |
| Overvoltage protection | Voltage: 120V AC/DC maximum, Current: 8V AC/DC (with onboard current resistor), maximum |
| Common mode noise rejection | 120 dB @ 60 Hz, 100 dB @ 50 Hz |
| Normal mode noise rejection | 60 dB @ 60 Hz |
| Module error | 0.54% of range |
| Gain drift with temperature | Voltage: 35 ppm/°C, 80 ppm/°C maximum, Current: 45 ppm/°C, 90 ppm/°C maximum |
| Module input scan time, min | 25 ms minimum – floating point, 10 ms minimum – integer |
| Settling time | <80 ms to 5% of full scale |
| Total backplane power | 3.7 W |
| Thermal dissipation | Voltage: 12.62 BTU/hr, Current: 14.32 BTU/hr |
| Current draw | 250 mA @ 5.1V, 100 mA @ 24V |
| Inputs | 6 individually isolated |
| Power dissipation | Voltage: 3.7 W, maximum, Current: 4.3 W, maximum |
| Resolution | 16 bit, 10.5V: 343 μV/bit, 0...10.5V: 171 μV/bit, 0...5.25V: 86 μV/bit, 0...21 mA: 0.34 μA/bit |
| Calibrated accuracy | Better than 0.1% of range @ 25 °C (77 °F) |
| Open circuit detection time | Positive full scale reading within 5 s |
