HCM
IFL 50-385-10/01 M20
Delivery time:12 weeks
| Standards |
DIN VDE 0660-208 EN IEC 60947-5-2 |
| Housing construction form |
Block |
| Installation conditions (mechanical) |
not flush |
| Enclosure material |
Plastic |
| Gross weight |
420 g |
| Integral system diagnostics, status |
Yes |
| Number of cable wires |
2 |
| Nominal switching distance Sn |
50 mm |
| Termination |
Screw terminals M20 x 1.5 |
| Cable section, maximum |
2 x 1.5 mm² |
| Length of sensor |
40 mm |
| Width of sensor |
80 mm |
| Height of sensor |
135 mm |
| Degree of protection |
IP67 |
| Ambient temperature, minimum |
-25 °C |
| Ambient temperature, maximum |
+70 °C |
| Protection class |
II |
| Rated impulse withstand voltage Uimp |
4 kV |
| Voltage type |
AC (alternating current) |
| Rated supply frequency, minimum |
45 Hz |
| Rated supply frequency, maximum |
65 Hz |
| Operating voltage, minimum |
15 V |
| Operating voltage, maximum |
250 V |
| Operating current, minimum |
10 mA |
| Operating current |
500 mA |
| Switching element |
NO contact or NC contact |
| Protection circuit integrated |
inductive interference protection |
| Switching frequency, approx. |
10 Hz |
| Voltage drop Ud, maximum |
4.5 V |
| Current at Voltage drop Ud |
0.2 A |
| Design of control elements |
Two-wire |
| Current leakage Ir, maximum |
1 mA |
