HCM
FX3-XTI084002
Delivery time:3-5 days
Electrical parameters
Protection class III (EN 61140)
Voltage supply via FLEXBUS+
Internal power consumption ≤ 2.2 W 1)
Input terminal
Input voltage HIGH 13 V DC... 30 V DC
Input voltage LOW – 5 V DC... 5 V DC
Input power HIGH 2.4 mA... 3.8 mA
Input power LOW – 2.5 mA... 2.1 mA
Test output terminal
Voltage supply via FLEXBUS+
Output mode PNP semiconductor, short circuit protection
Test pulse generator 2
Output voltage HIGH 15 V DC... 30 V DC
Output current ≤ 120 mA 2)
Output terminal
Voltage supply through A1, A2
Supply voltage 24 V DC (16.8 V DC... 30 V DC)
Type of power supply voltage PELV (protection extra low voltage) or SELV (safety extra low voltage) 3)
Output mode PNP semiconductor, short circuit protection
Output voltage HIGH 16 V DC... 30 V DC
Output current ≤ 2 A
1) Through FLEXBUS+, test that there is no current at the output end
2) On both test pulse generators. Therefore, up to 8 testable safe series connections can be realized for each module, and the maximum current is 30 mA respectively
3) The external current of the power supply of the module must be limited to a maximum of 4 A. Either through the power supply itself or through the controller
Mechanical parameters
Dimensions (W x H x D) 22.5 mm x 96.5 mm x 120.6 mm
Weight 164 g (± 5%)
Environmental parameters
Enclosure protection grade IP20 (EN 60529)
Operating ambient temperature – 25 ° C...+55 ° C
Storage temperature range – 25 ° C...+70 ° C
Air humidity 10%... 95%, non condensing