HCM
AFM60A-S4NB018X12
Delivery time：20 weeks
performance
Steps per lap (maximum resolution) 262144 (18 bit)
Turns 4096 (12 bit)
Maximum resolution (steps per turn x turns) 18 bit x 12 bit (262144 x 4096)
Error limit G 0.03 ° 1)
Repetitive standard deviation σ r 0.002° 2)
1) According to DIN ISO 1319-1, the upper and lower error limits depend on the installation situation, and the specified values are applicable to the symmetrical situation, that is, the deviation in the upper and lower directions is the same
2) According to DIN ISO 55350-13; 68.3% of the measured values are within the specified range
Interface
Communication interface PROFINET
Encoder configuration V4.1 class3
Data transfer rate
10 Mbit/s
100 Mbit/s
Transmission medium CAT 5e cable
Initialization time 6 s
Cycle time ≤ 1 ms
Parameters
Steps per lap
Number of turns
PRESET
Counting direction
Sampling rate for speed calculation
Unit used for speed value output
Circular axis function
Available diagnostic data
Minimum and maximum temperature
Maximum speed
Counter power supply
Working time counter power/start
Counter for measuring direction change, action quantity cw action quantity ccw
Maximum operating voltage
Electrical parameters
Connection type
Plug, 1x, M12, 4-pin, axial 1)
Socket, 2x, M12, 4-pin, axial 2)
Supply voltage 10 30 V
Power consumption ≤ 3 W (no load)
Reverse polarity protection ✔
MTTFd: 80 years between dangerous failures (EN ISO 13849-1) 3)
1) A code
2) D code
3) This product is a standard product, not a safety component made according to the mechanical instructions. The calculation is based on the rated load of the component, the average ambient temperature of 40 ° C, and the service frequency of 8760 hours/year. All electronic faults are considered as dangerous faults. For details, see document No. 8015532
