HC
VLT® 2800 Series Drives
delivery time:
Power range
0.55 - 18.5 kW (3 phase 380 - 480 V ± 10%; 50/60 Hz)
0.37 -1.5 kW (single-phase and three-phase available, 200 - 240 V ± 10%; 50/60 Hz)
2.2 - 3.7 kW (3 phase 200 - 240 V ± 10%; 50/60 Hz)
Variable output frequency between 0 and 1000 Hz
product safety
100% short circuit proof
100% ground fault protection
Mains Transient Protection
input switching output switching
High and low voltage insulation
Designed according to EN 50178
Speed Compensated Precise Stop
better process control
The stopping distance is the same regardless of the initial motor speed
Precise stop
Stopped by interrupt control
Higher process repeatability
clearly defined stop
technical parking
Accurate positioning
High frequency input (65 kHz)
24 V incremental encoder input
AB encoder input (optional)
Automatic Motor Tuning
Perfect matching of motor and frequency converter
Measuring Stator Resistance (RS)
better spindle performance
No torque required during measurement
Check motor for missing phase
No derating at 45°C
The VLT® 2800 operates at ambient temperatures up to 45°C without derating and can operate at temperatures up to 40°C
continuous work in the state.
Features and Benefits
Flexible installation
Horizontal installation
vertical installation
True side-by-side installation
No derating will occur
The same goes for individual modules
Temperature controlled fan
Cooling Plate Technology
Reduced heat inside the cabinet
denser installation
Better sealing of the cabinet
Protection ability:
- Dustproof
- Antifouling
- Moisture proof
Heat dissipates from the back of the drive
communication
DeviceNet
ModBus RTU
Metasys N2
Profibus DP, option
Fieldbus system
Profibus DP, 3 or 12 Mbit/s
Up to 127 nodes per system
DeviceNet, up to 500 kbit/s up to 64 nodes per system
EMC filters and DC coils comply with EMC standards.
Built-in EN 55011 1A filter with 25m shielded cable.
No EMC interference.
EN 55011 1B filters are available as modules.
IT mains compatible model with RFI filter (max 4 kW).
VLT 2880-2882 (with RFI switch).
Brake function
DC braking - about 20% braking torque
AC braking - about 20% braking torque
dynamic braking
- Built-in brake chopper
- 160% braking torque
LCP2 alphanumeric display with copy function
MCT10 software
