HCM
CS1W-BC103
Delivery time:3 days
Input points: 4 points.
Input signal range: 1-5V, 4-20mA.
Resolution: 1/1023 (full scale).
Transformation speed: 2.5 ms/point.
Convert analog input signals such as voltage and current into binary (BIN) data, and take them to OMRON CS1W-BC103 in PC
In the process of industrial production, there are many continuously changing quantities,
For example, temperature, excitation, flow, liquid level and speed are analog quantities CS1W-BC103
To enable the programmable controller to process analog quantities,
A/D conversion and D/A conversion between analog quantity (Analog) and digital quantity (Digital) must be realized.
PLC manufacturers all produce supporting AD and D/A conversion modules,
The programmable controller is used for analog control. Control specification: voltage output/pulse train output Omron CS1W-BC103
Number of control axes: 1 axis.
Location data: 200 points
Connected with servo motor driver,
The positioning is carried out by transferring the position data by PC.
It can set the number of stations and position parameters of different types of products, and can run the process online.
The equipment is flexible and convenient to operate, and can be started and paused,
Automatic and manual mode switching, counting and resetting, cylinder pressing time adjustment, etc.
Automatic discharge and feeding of screws Fixed, automatically completed by machine, without manual assistance Omron CS1W-BC103
High speed production rhythm, which can achieve a single station speed of no less than 1-1.5 seconds.
The positioning accuracy is high, and the position error is not more than 0.02mm. Input points: 8 points.
Operating voltage (ON voltage): small DC60V
Operating voltage (OFF voltage): large DC20V
Response time (ON delay): 35ms Omron CPU backplane.
Response time (OFF delay): 55 ms.
External connection: terminal block.
Input common terminal: 8.
Current consumption (DC5V): 50mA.
Input voltage: AC100-120V+10%/15%.
Input current: 5mA (AC100V).
Input impedance: 20KQ (50Hz) 17KQ (60Hz).
Double I/O points and program capacity, providing enough control capacity Omron CPU backplane.
Compared with CQM1, the program capacity, DM capacity and I/O points are increased by - times.
Add program and DM capacity to meet more complex control programs,
And the need for data processing that requires higher functionality.
Increase the number of/0 to support the Omron CPU backplane of large systems and dedicated IO units. Number of circuits: 2-circuit, with heater disconnection alarm.
Temperature sensor input: platinum resistance (JPt100, Pt100).
Control output: open collector NPN output (pulse)
A single unit can perform all functions of 4 temperature controllers.
High power function/O0 unit with thermocouple or platinum resistance direct input, PID control with 2 degrees of freedom and collector open circuit output CS1W-
BC103。
Built in PID control Omron CS1W-BC103 with 2 or 4 control loops or ON/OFF control
Direct input of 7 types of thermocouples or platinum resistors.
The cycle is 500ms.
Run/stop control of CPU unit.
Unlimited CPU unit cycle time.
Heater disconnection detection.
Automatic adjustment (AT) function.
