ADN-40-350-A-P-A

ZLL

ADN-40-350-A-P-A 

delivery  time:6weeks

• Stroke1 mm ... 400 mm
• Piston diameter40 mm
• CushioningElastic cushioning rings/plates at both ends Self-adjusting pneumatic end-position cushioning
• Mounting positionoptional
• Conforms to standardISO 21287
• DesignPiston Piston rod Profile barrel
• Position detectionVia proximity switch
• VariantsEX protection approval (ATEX) Metals with copper, zinc or nickel as main constituent are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils. Improved running performance Extended male piston rod thread Custom thread on the piston rod Extended piston rod With protection against rotation High corrosion protection Dust protection Reinforced piston rod Uniform, slow movement Low friction Through piston rod Through, hollow piston rod Heat-resistant seals max. 120°C Laser etched rating plate Temperature range -40 to 80°C Piston rod at one end
• Operating pressure0.06 MPa ... 1 MPa
• Operating pressure0.6 bar ... 10 bar
• Mode of operationDouble-acting
• CE mark (see declaration of conformity)To EU Explosion Protection Directive (ATEX)
• CE marking (see declaration of conformity)To UK EX instructions
• Explosion protectionZone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX)
• ATEX category gasII 2G
• ATEX category dustII 2D
• Explosion ignition protection type for gasEx h IIC T4 Gb
• Explosion ignition protection type for dustEx h IIIC T120°C Db
• Explosion ambient temperature-20°C <= Ta <= +60°C
• Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
• Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required)
• Corrosion resistance class CRC0 - No corrosion stress 2 - Moderate corrosion stress 3 - high corrosion stress
• LABS (PWIS) conformityVDMA24364-B1/B2-L VDMA24364 zone III
• Suitability for the production of Li-ion batteriesMetals with more than 1% copper, zinc or nickel by mass are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils
• Cleanroom classClass 4 according to ISO 14644-1 Class 5 according to ISO 14644-1
• Ambient temperature-40 °C ... 120 °C
• Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke686 N
• Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke686 N ... 754 N
• Moving mass for 0 mm stroke80 g
• Additional moving mass per 10 mm stroke9 g
• Basic weight for 0 mm stroke346 g
• Additional weight per 10 mm stroke37 g
• Type of mountingEither: With through-hole Via female thread With accessories
• Pneumatic connectionG1/8
• Note on materialsRoHS-compliant
• Material collar screwsSteel
• Material coverAnodised wrought aluminium alloy
• Material piston rodHigh-alloy steel
• Material cylinder barrelSmooth-anodised wrought aluminium alloy